Frequently Asked Questions

1.Questions about products or how to order?

If you have any questions, please email us directly at Sales@ledml.com

2. What color light is the best for hunting?

Light color is a personal preference. All colors of light can be used for night hunting,but we recommend using GREEN LIGHTS FOR HOGS & Predators. Predators are least likely to be spooked by a red light. Hogs are color blind and the RED or GREEN will not bother them, unless they see their shadow. GREEN light is much easier for the human eye to see versus red light, which is why most people choose green.

3.What should I do while my light is flickering?

At times you may experience an intermittent flickering from your light.If this happens please don not panic.Here is an easy fix for 99% of these occurrences.

First remove the tailcap from the light,and then look in the area of the spring in the tailcap.You would see an aluminum colored spanner nut/washer surrounding the spring.This nut/washer will have two round indentations directly across from each other.Place the tips of a plier into these two indentations and use it to rotate the entire nut/washer clockwise to tighten.If this procedure doesn’t fix your light,please contact us.

4. Can I get the lights with different colored lenses？

No, They do not use colored lenses. They use Red,Green and White LED's so you get the brightest lights possible. You can however buy LED modules to change the color or your light.

5. Do I have to run the 18650 battery all the way down before I charge it?

No, The batteries can be charged at any time as they don't have a memory. When you notice your light is much dimmer then with a fully charged battery it is time to charge them. Please note that our batteries have a protection circuit in them so they can not be discharged too low. When the battery gets too low the protection circuit kicks in and cuts the power off.

6.What does single mode,dual mode and triple mode mean?

Mode simply menas levels of brightness.So a single model light has only one brightness level.Dual mode means you have two brightness options,low and high power.Triple mode means you have three levels of brightness to choose from( low,medium and high power).This functionality is built into the led module itself.